I have soooo many questions. Approximate hardware cost? Pain of needle? Pain of zap? How does the sensation of your machine compare to commerical applications? How long has it been since the first tests? Results from those tests? Is there some sensation that indicates having inserted to the proper depth? Is it an increase in resistance or an increase in pain? Have you used it anyhwere but the hand? Does the pain scale the same way everything else does (like the lip and chin hurt more than the arms?)
Full disclosure, I may or may not have caused some scarring having attempted to do this in a very rudimentary way with some 9volts when I thought that it was purely the heat from the electricity that we were after. This seems to be a vast improvement over the nightmare I came up with, even with the car battery as at least you've got voltage regulation.
>this board contains one or more chemicals known to the state of california to cause feminization :3 :3 :3 :3
I get electrolysis (from a professional, not DIY, lol) and it does hurt a fair bit, but it's not intolerable for me. It's roughly the pain of tweezing a hair, only repeated a couple hundred times per session. I put on a podcast and just kind of get through it.
If this has been done appropriately and safely, it should be similar.
One thing I will mention, having watched the video, is that I think this goes about the same speed as what the pros do? It takes around 20 seconds for removal of the whole hair (about 10 seconds of current plus 10 seconds tweezing, inserting needle, etc.) in the video. My tech can usually remove around 200 hairs in an hour, which comes out to about the same (200 / 60 = 3.33 hairs per minute = around 18 seconds a hair).
Yeah, my tech is a trainee. I'm sure one who's been doing it for years would go faster, but she's inexpensive and I don't mind helping her learn! The results have been solid so far.
I do not understand why you would describe it as hilarious tbh.
But the hacker scene itself has quite a high and open trans culture. At least on hacker events, camps and congresses like from the ccc, i see quite 'a lot' of trans people.
I agree but HN always seemed more conservative or at least less queer than the "usual", personally I'd have assumed "hilarious" was meant more in a sardonic way, a reverse of the usual than literally hilarious
I mean, it's just a fancy hydrocarbon, and in some form or another can be extracted from female mammal urine.
I imagine there's a way to genetically alter yeasts to make estrobeer while they're at it, with the side benefit that the alcohol would serve as a natural testosterone reducer for a double d whammy.
@y1n0 any chance that I can get in contact with you to help build my own?
I'm already up to several thousand in spend doing it the traditional way (which has been very helpful!) but it's not sustainable even on an upcoming big-tech salary.
I'm a trans woman who's had a lot of electrolysis. Almost all of us get permanent hair removal on our face if we can afford it. Laser is far cheaper and quicker, but not everyone can get it since it needs specific hair and skin colour combinations.
Electrolysis on my face and neck has cost me tens of thousands. Think $100 per hour, and it taking 100-300 hours to complete typically. Full body hair removal would easily run in to hundreds of thousands, but very few people will be able to afford that.
I also don't see the aesthetics behind it, but I guess that's the hetero guy speaking.
Women are expected to not have beards, and having one or any beard shadow will get you seen as "a man" very quickly. It's both for safety, and reducing the amount of dysphoria we experience.
I looked at the arm hair in the video, than at my grizzly arms and totally forgot about facial hair!
That sounds super expensive, isn't there a trend to do that abroad?
I remember seeing Istanbul airport full of hair transplant patients, apparently people go there to have more hair at an affordable cost, maybe the opposite is also available at less than $100/h?
Electrolysis is something that needs to be done roughly every 6 weeks, as hairs regrow. Each hair can need multiple treatments to fully kill off, too. There's probably some countries where you can hop over the border to get it done cheaper as a day trip, but I doubt most people will be able to do such a long trip every few months.
There's cheaper places than where I go, for sure, but operator skill is a big part of electrolysis. It's the difference between getting scarred or not, and it's the difference of a hundred hours time spent because the operator wasn't using enough power.
The reality is that it's just time intensive, and there's not many good experienced operators around where I live
> Laser is far cheaper and quicker, but not everyone can get it since it needs specific hair and skin colour combinations
Laser is also often (usually?) not permanent (I am the right combination of fair-skinned and dark-haired). And hella painful from personal experience, though I can't compare to electrolysis.
FWIW, as a trans woman, I assumed that was for demonstration purposes to avoid showing anything intimate or identifying. Though some of us do remove essentially all hair south of the eyes.
Thicker and longer arm hair is still a masculine trait. Testosterone thickens hair all over your body. Feminising HRT does revert body hair for some people (but not facial hair, it's a biological quirk), but usually not enough to where cis women are if you started out hairy
I feel like harrier arms on women isn't that uncommon, but that could also just be the people I hang around (they tend to be more punk/hippie than the average)
Also a hairy man. I got a small amount done about 20 years ago because I didn't want to end up with "old man ear hair" like my relatives (TMI, sorry).
At the time, a visit was $60. It wasn't painful but I did feel a twinge/shock for each hair. Multiple visits are required because of how follicles work - they grow hair in phases. The technician would treat the ones she saw, but then I had to wait until the next growth phase to return for her to get the next batch. About 10 trips in all.
Typically not everywhere, but places with really coarse and dark hair like the face and chest are pretty common. Also, you need some done down there for some PIV vaginoplasty (though, some surgeons remove hair in other ways. in general a lot of mtf bottom surgery varies from surgeon to surgeon though)
Yeah, I tend to think of body hair as an adult trait, not a masculine trait. Aesthetically I see this kind of like a badass custom tattoo gun, where the tattoo is your own skin without the parts you don't like.
I think she meant that going to a place to get it done for the whole body costs that much. It still sounds expensive, but who knows.
Though, I have no idea who would want to sit through something that takes ten seconds per body hair. I got a light hair removal device and it's waaaaaaaay faster and cheaper.
Step 2, put the needle on a gantry (I suspect you'd need more like 5D CNC to enter the pore with the right angle) and seek and destroy hairs... As it is it saves money but not time nor skill...
Yeah, late one day in the lab, tired, aligning lasers, I used a mirror to check alignment because I knew I shouldn't put my eye in the path - so, like a complete, overtired idiot, I put the path in my eye instead.
And thought, Hey, that wasn't very smart! And Wow! I am (temporarily) blind.
It wasn't an eye-threat-level laser. Thankfully. Which is why one wears bandgap glasses when working with those: it's SO easy to mess up!
With high-powered lasers, you can go blind instantly. I also worked with lasers (in a lab, with all the safety precautions), yet I have slight eye damage in one eye.
There's a small burnt patch on my fovea, so if I look at something like a regular grid (e.g. a page with text) with the damaged eye, the grid becomes warped at the point of focus. And I found out about that only when I was doing a regular planned eye exam (I was wearing corrective glasses).
This type of damage is extremely common with lasers, and it can stay invisible and compound until the brain runs out of its ability to do fixes in post-processing.
Wow. As my only experience with lasers is playing with laser pointer I suppose the laser damage of this type is mostly by multiple reflections that are not really even seen by visible eye or scattered beam reflected from some surface you are not expecting it from?
Say it takes 10 minutes to shave a beard, and you have to shave it every 3 days, in one month, that's 100 minutes. In 10 months, that's 1,000 minutes. Two years gets you 2,400 minutes, or 40 hours. And that's just a beard. Spending 42 hours to get it done once seems like a great deal on comparison!
Tindie is great for this type of stuff, if OP needs a platform. Though my experience is only as a buyer.
That said, if you have a 3D printer these days the process of ordering a board with full PCBA from PCBWay/JLCPCB/Aisler and printing the case yourself is pretty easy.
I have soooo many questions. Approximate hardware cost? Pain of needle? Pain of zap? How does the sensation of your machine compare to commerical applications? How long has it been since the first tests? Results from those tests? Is there some sensation that indicates having inserted to the proper depth? Is it an increase in resistance or an increase in pain? Have you used it anyhwere but the hand? Does the pain scale the same way everything else does (like the lip and chin hurt more than the arms?)
Full disclosure, I may or may not have caused some scarring having attempted to do this in a very rudimentary way with some 9volts when I thought that it was purely the heat from the electricity that we were after. This seems to be a vast improvement over the nightmare I came up with, even with the car battery as at least you've got voltage regulation.
>this board contains one or more chemicals known to the state of california to cause feminization :3 :3 :3 :3
You are a legend and an inspiration.
I get electrolysis (from a professional, not DIY, lol) and it does hurt a fair bit, but it's not intolerable for me. It's roughly the pain of tweezing a hair, only repeated a couple hundred times per session. I put on a podcast and just kind of get through it.
If this has been done appropriately and safely, it should be similar.
One thing I will mention, having watched the video, is that I think this goes about the same speed as what the pros do? It takes around 20 seconds for removal of the whole hair (about 10 seconds of current plus 10 seconds tweezing, inserting needle, etc.) in the video. My tech can usually remove around 200 hairs in an hour, which comes out to about the same (200 / 60 = 3.33 hairs per minute = around 18 seconds a hair).
oh wow, your tech must be real slow. Mine will do a hair every 5 seconds. But she’s been doing it for 20 years.
I find this invasion of hacker news by trans women talking about hair removal delightful and hilarious. (Of course, we were all here all along.)
Yeah, my tech is a trainee. I'm sure one who's been doing it for years would go faster, but she's inexpensive and I don't mind helping her learn! The results have been solid so far.
I do not understand why you would describe it as hilarious tbh.
But the hacker scene itself has quite a high and open trans culture. At least on hacker events, camps and congresses like from the ccc, i see quite 'a lot' of trans people.
And that for years if not decades by now.
I agree but HN always seemed more conservative or at least less queer than the "usual", personally I'd have assumed "hilarious" was meant more in a sardonic way, a reverse of the usual than literally hilarious
[dead]
Hell yeah. I feel like if the world ended there would be a group of trans woman with a wind powered experimental estrogen generator inside of a week.
Knowing us it'd probably be in portland
Sidenote a fallout game in portland should totally feature this
I mean, it's just a fancy hydrocarbon, and in some form or another can be extracted from female mammal urine.
I imagine there's a way to genetically alter yeasts to make estrobeer while they're at it, with the side benefit that the alcohol would serve as a natural testosterone reducer for a double d whammy.
Can confirm, I’ve extracted estrogen from my own urine.
How did you detect/measure the estrogen after the extraction process?
[flagged]
This is not X or 4chan mister.
[flagged]
wow, so edgy. does my little edgelord need mommy to hold his hand and tell him how edgy he is?
[flagged]
[flagged]
How would you know? You haven't said anything funny yet.
I am not sure who would find your comment funny. It's just misogyny, bro.
[dead]
[flagged]
You need to be banned from this site. If not this site then this world. jesus.
I mean. What other reaction would you expect?
@y1n0 any chance that I can get in contact with you to help build my own?
I'm already up to several thousand in spend doing it the traditional way (which has been very helpful!) but it's not sustainable even on an upcoming big-tech salary.
thanks <3 hazel
I'm a rather hairy man and I literally don't even want to imagine the pain of going through this hair-by-hair.
I also don't see the aesthetics behind it, but I guess that's the hetero guy speaking.
Is this something that M2F trans people typically do?
Is it really this expensive? OP mentions hundreds of thousands of dollars.
I'm a trans woman who's had a lot of electrolysis. Almost all of us get permanent hair removal on our face if we can afford it. Laser is far cheaper and quicker, but not everyone can get it since it needs specific hair and skin colour combinations.
Electrolysis on my face and neck has cost me tens of thousands. Think $100 per hour, and it taking 100-300 hours to complete typically. Full body hair removal would easily run in to hundreds of thousands, but very few people will be able to afford that.
I also don't see the aesthetics behind it, but I guess that's the hetero guy speaking.
Women are expected to not have beards, and having one or any beard shadow will get you seen as "a man" very quickly. It's both for safety, and reducing the amount of dysphoria we experience.
(edited for formatting)
Thanks for the clear answer!
I looked at the arm hair in the video, than at my grizzly arms and totally forgot about facial hair!
That sounds super expensive, isn't there a trend to do that abroad?
I remember seeing Istanbul airport full of hair transplant patients, apparently people go there to have more hair at an affordable cost, maybe the opposite is also available at less than $100/h?
Electrolysis is something that needs to be done roughly every 6 weeks, as hairs regrow. Each hair can need multiple treatments to fully kill off, too. There's probably some countries where you can hop over the border to get it done cheaper as a day trip, but I doubt most people will be able to do such a long trip every few months.
There's cheaper places than where I go, for sure, but operator skill is a big part of electrolysis. It's the difference between getting scarred or not, and it's the difference of a hundred hours time spent because the operator wasn't using enough power.
The reality is that it's just time intensive, and there's not many good experienced operators around where I live
> Laser is far cheaper and quicker, but not everyone can get it since it needs specific hair and skin colour combinations
Laser is also often (usually?) not permanent (I am the right combination of fair-skinned and dark-haired). And hella painful from personal experience, though I can't compare to electrolysis.
Ah, that makes a lot of sense. I was hung up on the arm hair.
FWIW, as a trans woman, I assumed that was for demonstration purposes to avoid showing anything intimate or identifying. Though some of us do remove essentially all hair south of the eyes.
Thicker and longer arm hair is still a masculine trait. Testosterone thickens hair all over your body. Feminising HRT does revert body hair for some people (but not facial hair, it's a biological quirk), but usually not enough to where cis women are if you started out hairy
I feel like harrier arms on women isn't that uncommon, but that could also just be the people I hang around (they tend to be more punk/hippie than the average)
The people I hang around tend to be more Italian than average. I bet there are a lot of factors
Also a hairy man. I got a small amount done about 20 years ago because I didn't want to end up with "old man ear hair" like my relatives (TMI, sorry).
At the time, a visit was $60. It wasn't painful but I did feel a twinge/shock for each hair. Multiple visits are required because of how follicles work - they grow hair in phases. The technician would treat the ones she saw, but then I had to wait until the next growth phase to return for her to get the next batch. About 10 trips in all.
https://en.wikipedia.org/wiki/Human_hair_growth#Growth_cycle
The ear hairs just started appearing a few years ago, I don't like them either, I might actually also get them removed.
Yeah, every decade it seems it's a new horror. Nostrils, then ears…
Typically not everywhere, but places with really coarse and dark hair like the face and chest are pretty common. Also, you need some done down there for some PIV vaginoplasty (though, some surgeons remove hair in other ways. in general a lot of mtf bottom surgery varies from surgeon to surgeon though)
Yeah, I tend to think of body hair as an adult trait, not a masculine trait. Aesthetically I see this kind of like a badass custom tattoo gun, where the tattoo is your own skin without the parts you don't like.
I think she meant that going to a place to get it done for the whole body costs that much. It still sounds expensive, but who knows.
Though, I have no idea who would want to sit through something that takes ten seconds per body hair. I got a light hair removal device and it's waaaaaaaay faster and cheaper.
anyone with skin that makes laser/ipl inapplicable, for one
[flagged]
You didn't need to make an account just to write that, because you are not welcome here.
“Hetero” isn’t the word you’re looking for, buddy.
I did not get all the transgender references in the comments but gemini found it without issues.
Nonetheless, great thing to have this. You can have a great default 'shave', can get rid of your ear hair, the hair on your toe nails.
I need this
The hair on your toe nails??
Ah no, sry on my toes behind my toe nails :D
Step 2, put the needle on a gantry (I suspect you'd need more like 5D CNC to enter the pore with the right angle) and seek and destroy hairs... As it is it saves money but not time nor skill...
Very good work. I will try and build my own from your instructions when I can afford to. Thank you so much for making this open.
Finally, directed energy weapons for trans people.
Well done. Next project DIY IPL for those hair bears amongst us?
In general, experimenting at home with these kinds of light intensities is NOT a good idea. Way too much risk of accidental eye damage.
https://www.funraniumlabs.com/2024/07/how-i-got-my-laser-eye...
A fun related story about how even nominally professionals need adult oversight when working with high powered lasers.
Yeah, late one day in the lab, tired, aligning lasers, I used a mirror to check alignment because I knew I shouldn't put my eye in the path - so, like a complete, overtired idiot, I put the path in my eye instead.
And thought, Hey, that wasn't very smart! And Wow! I am (temporarily) blind.
It wasn't an eye-threat-level laser. Thankfully. Which is why one wears bandgap glasses when working with those: it's SO easy to mess up!
Holy shit what a story. JFC
lol, nice to know that I can go blind just randomly while working on the street.
I'm kinda curious what was sum of the damage in the end.
With high-powered lasers, you can go blind instantly. I also worked with lasers (in a lab, with all the safety precautions), yet I have slight eye damage in one eye.
There's a small burnt patch on my fovea, so if I look at something like a regular grid (e.g. a page with text) with the damaged eye, the grid becomes warped at the point of focus. And I found out about that only when I was doing a regular planned eye exam (I was wearing corrective glasses).
This type of damage is extremely common with lasers, and it can stay invisible and compound until the brain runs out of its ability to do fixes in post-processing.
Wow. As my only experience with lasers is playing with laser pointer I suppose the laser damage of this type is mostly by multiple reflections that are not really even seen by visible eye or scattered beam reflected from some surface you are not expecting it from?
This type of damage is common if you look at the spot that the laser makes on an object. Your eye automatically focuses it into the foveal area.
I don't remember ever doing that without protective glasses, but evidently I did at some point.
unless you're styropyro
This is very impressive... The temptation to build my own now...
…it's basically a medical device designed by an idiot…
That cracked me up!
designed, but never tested
Excellent hack, lovely write up. Learned about Embassy, which I didn't know yet. Thank you!
This is so interesting, thanks for sharing!
One thing eludes me... We have thousands of hair follicles, how is that supposed to work in a finite amount of time?
One step at a time? Quick back of the envelope: Assuming 30k body hair follicles, at 5s/follicle that's 42 hours.
Now if you just want to do your arms this is like down to a few hours. Not so bad?
Say it takes 10 minutes to shave a beard, and you have to shave it every 3 days, in one month, that's 100 minutes. In 10 months, that's 1,000 minutes. Two years gets you 2,400 minutes, or 40 hours. And that's just a beard. Spending 42 hours to get it done once seems like a great deal on comparison!
Very cool! How can I order one?
Tindie is great for this type of stuff, if OP needs a platform. Though my experience is only as a buyer.
That said, if you have a 3D printer these days the process of ordering a board with full PCBA from PCBWay/JLCPCB/Aisler and printing the case yourself is pretty easy.
I am equal parts terrified and amazed by this. Well done, fantastic.
Very fan for this girl.
Cool
Hell yeah this rules
Damn. This went from car battery style electrocution to custom PCB design unexpectedly quick.
Kudos, amazing design.
god, trans women are cool (totally not biased at all what are you talking about :3)
based
[dead]
[dead]
[dead]
[flagged]
This account was made solely to leave this comment, for what that’s worth to the non-bad-faith users on here.
[flagged]
Yep! I don’t comment unless I have something useful to add to the conversation.
[flagged]
Nah, calling out morons and assholes is always useful
based