I once had internet only through the wifi of a cafe that was a little ways away. As I recall the average speed was 2.5 kB/s.
The web didn't work at all, but I was able to use mosh, so I used w3m (terminal based web browser) on my VPS and was able to have a reasonably pleasant time on the web.
I acknowledge SSH auth requests with my security key backed ed25519-sk ssh key. Something that wasn't even on the radar back when they closed this ticket. (Just like their "solution" guardian-agent is no longer on the radar.)
In the US at least, the button actually has to connect you to monitoring staff. It can be the building staff if they have 24/7 support but it usually goes to an outside monitoring company. It also has to be in a highly accessible location which is why it’s at the bottom of the panel generally. The US is kind of a stickler for accessibility and safety in building codes, despite the country’s reputation.
This is an older post from the UK so I don’t know if the button was required to be connected and something was wrong or if they really can leave it as a simple alarm like that.
I, personally, would take the opportunity to have an undisturbed nap. The thought of having no notifications and a great excuse for why I wasn’t answering sounds lovely today.
When I was homeless and living on the streets, if it was rainy or cold I would take shelter in an elevator.
This elevator was accessible from outside and nearly nobody used it, especially not at night when the shops were all closed. I did not use the Emergency Stop button.
It was not comfortable, but I could nap. I would put it on the 2nd floor, and when the housekeeping team arrived, the elevator would begin moving to the first floor and I had enough time to wake up, stand, and stroll out as the doors opened.
In real life, there is no maintenance hatch to punch out , because the elevator manufacturer doesn’t want to be liable for people falling down an elevator shaft or being crushed.
If you somehow manage to get on top of the elevator cab (indeed as the sibling comment points out, there is no escape hatch at the top), you will generally see a small control panel with a switch to put it in inspection mode. That turns off autonomous control and from there the cab will stay where it is unless you manually action the up/down switches (assuming the "safety chain" isn't broken - which if the elevator suddenly stops, it may be - so even those won't do anything then).
The predictive echo mechanism in Mosh is still the gold standard for high-latency or intermittent connections. This elevator test case perfectly demonstrates why handling packet loss at the application layer beats standard TCP-based SSH when the physical link is failing. I wonder if modern QUIC-based terminal emulators have managed to replicate this level of responsiveness without the stateful synchronization overhead.
I once had internet only through the wifi of a cafe that was a little ways away. As I recall the average speed was 2.5 kB/s.
The web didn't work at all, but I was able to use mosh, so I used w3m (terminal based web browser) on my VPS and was able to have a reasonably pleasant time on the web.
Sending an email for an emergency! I thought it would only happen on IT Crowd: https://www.youtube.com/watch?v=1EBfxjSFAxQ
And sometimes, the email bounces, and the sender dies. (Juan was a coworker of mine - this happened in 1998.)
https://xana.scru.org/posts/etiamdisco/nototolaryngology.htm...
FWIW they did eventually implement an emergency number [1] including a jingle to help remember it.
[1] - https://www.youtube.com/watch?v=5m6qutSER9Q
0118 999 881 999 119 725
3
i hate that my memory is turning to absolute mush but i think i will always be able to recite this from memory
I got stuck in a lift once. I mashed button combinations to get eventually get out. I found out after the fact you need to hold down the buttons.
User interfaces are apparently hard...
Would love to use Mosh but https://github.com/mobile-shell/mosh/issues/120
I acknowledge SSH auth requests with my security key backed ed25519-sk ssh key. Something that wasn't even on the radar back when they closed this ticket. (Just like their "solution" guardian-agent is no longer on the radar.)
What are you supposed to do if you get stuck in a lift and you don't have your laptop (or zero cell signal for example)?
In the US at least, the button actually has to connect you to monitoring staff. It can be the building staff if they have 24/7 support but it usually goes to an outside monitoring company. It also has to be in a highly accessible location which is why it’s at the bottom of the panel generally. The US is kind of a stickler for accessibility and safety in building codes, despite the country’s reputation.
This is an older post from the UK so I don’t know if the button was required to be connected and something was wrong or if they really can leave it as a simple alarm like that.
I, personally, would take the opportunity to have an undisturbed nap. The thought of having no notifications and a great excuse for why I wasn’t answering sounds lovely today.
When I was homeless and living on the streets, if it was rainy or cold I would take shelter in an elevator.
This elevator was accessible from outside and nearly nobody used it, especially not at night when the shops were all closed. I did not use the Emergency Stop button.
It was not comfortable, but I could nap. I would put it on the 2nd floor, and when the housekeeping team arrived, the elevator would begin moving to the first floor and I had enough time to wake up, stand, and stroll out as the doors opened.
I can't see the lift obviously but in the movies they punch out the ceiling and climb out
In real life, there is no maintenance hatch to punch out , because the elevator manufacturer doesn’t want to be liable for people falling down an elevator shaft or being crushed.
In real life, the elevator starts working again and kills you.
If you somehow manage to get on top of the elevator cab (indeed as the sibling comment points out, there is no escape hatch at the top), you will generally see a small control panel with a switch to put it in inspection mode. That turns off autonomous control and from there the cab will stay where it is unless you manually action the up/down switches (assuming the "safety chain" isn't broken - which if the elevator suddenly stops, it may be - so even those won't do anything then).
Discussed in 2021:
https://news.ycombinator.com/item?id=28157117 (34 comments)
The predictive echo mechanism in Mosh is still the gold standard for high-latency or intermittent connections. This elevator test case perfectly demonstrates why handling packet loss at the application layer beats standard TCP-based SSH when the physical link is failing. I wonder if modern QUIC-based terminal emulators have managed to replicate this level of responsiveness without the stateful synchronization overhead.
what are those modern quic-based terminal emulators? i never heard about the concept before.